Gundlach Fein 9-20-28 Vacuum
Home  |  Reviews  |  Search  |  Technical Resources  |  Shipping  |  Locations
Thank you for visiting our website! For Customer Service call 954-974-1788 or email us at
Gundlach Fein 9-20-28 Vacuum
 $566.19 / ea

Gundlach Fein 9-20-28 Vacuum

All FEIN Turbo Series Vacuums have these features:
• Automatic tool on/off start feature turns the vacuum on/off when a connected power tool is switched on/off. In ‘Auto Start’ mode, the vacuum continues to run for 15 seconds to clear the hose after tool is turned off. Also has a ‘Manual’ operation mode.

• Two-stage bypass motor has a sealed fan for dust and debris suction, and a second fan to blow cooling air across the motor.

• Powerful 1100w motor gives a 98.4" static water lift rating, an air flow of 151 cfm and a 66 decibel sound level rating.

• Soft start motor helps prevent tripping circuit breakers.

• Flat top with a retention lip and a flush folding carrying handle.
• Two rear hooks for hose and cord storage, and two rear snap-on holding brackets for accessory storage.

• Crushproof 1-3/8" x 13' long hose has a swivel fitting at each end. The hose fitting turns to lock into the vacuum.

• Suction control tool adapter with a regulating vent to control the amount of suction, especially useful when sanding. The tool adapter also has internal annular rings for attachment to both the FEIN MultiMaster and SuperCut Dust-Free Sanding Kits.

• Flat pleated cartridge filter with a protective holder that allows the filter to be cleaned by tapping out accumulated dust.

• Four swivel casters with 2-1/2" diameter dual wheels for easy mobility and maximum stability. One caster is lockable to prevent vacuum movement.

• Sensors for automatic vacuum shutoff when maximum capacity is reached while wet vacuuming electrically conductive liquids. • Operate on 120v, 15 amp (9 amps for the Vacuum and 6 amps for the ‘Auto Start’ outlet) power through a 16' 14/3 grounded cord. C-CSA-US Listed.

• Compact size, with approximate dimensions of 17-1/4" long x 15" wide x 18-1/2" high (Turbo 1 Series) or 221/2" high (Turbo 2 Series).

• Includes the 1-3/8" x 13' hose, tool adapter with suction control, two snap-on accessory holding brackets, four casters, cartridge filter, fleece filter bag (1 each only) and an illustrated instruction manual.

• Three year parts and labor warranty with online registration.
** Read this information about Product Colors ** Warning The photos shown on this site are representative of the product colors. Actual colors may vary from the images shown for the following reasons:
  • The dye shades may vary from one production run to the next.
  • The color of the product will appear different in various lighting conditions (e.g. sunlight vs. fluorescent light).
  • Your individual monitor settings can cause the appearance of the color on the screen to differ from the actual photograph.
ReviewsAsk a Question Quantity:  ea 

0 items
Store Feedback
"After not being able to locate just a few pieces of cove base made by the original manufacturer we had used from another distributor, Greg was right on top of things and located and matched another manufacturer's product in just minutes. This is just for a few pieces of cove base and is a very small order, but I felt that my phone call was important and he was able to give me a product I could substitute, and I doubt anyone will ever notice! Thank you Greg!"

"Nice site, good selection of tools for the trade."

Quick Find
Use keywords to find the product you are looking for.
Advanced Search
Subscribe to the Newsletter
0 items
Manufacturer Info
Other products
Share Product
Share via E-Mail
Share on Facebook Share on Twitter
Electronic Payments
Home  |  Reviews  |  Search  |  Technical Resources  |  Shipping  |  Privacy  |  About Us  |  Conditions of use  |  Contact  |  Locations  |  Links  |  Site Map
Copyright © 2013-2018
Your IP Address is :