PROFLEX DPU SELF LEVELING CEMENT
Home  |  Reviews  |  Search  |  Technical Resources  |  Shipping  |  Locations
We just opened a new location in North Miami!!................................We just opened a new location in North Miami!!...................................We just opened a new location in North Miami!!..................................We just opened a new location in North Miami!!
PROFLEX DPU SELF LEVELING CEMENT
 $29.99 / ea


Proflex DPU is a self leveling compound of calcium aluminate cement, sand, and proprietary chemicals used to smooth and finish rough interior concrete or wood floors where a fast set is desired within hours. DPU may be applied up to 1 1/2 inches in a single application. Mixes with water, initial set 3-5 hours, no troweling or grinding, self healing during flowing and working time, light weight and superior strength.

Advantages:
  • Ready to mix product
  • May be poured up to 1 1/2" in a single application
  • Eliminates the need for grinding and troweling
  • Reduced weight and superior strength
Suitable Surfaces:
  • Concrete Substrates
  • Terrazzo
  • Tile
  • Exterior grade plywood
Primer required!
Priming;
  • All surfaces must be primed with proflex dpu primer prior to installing. The primer must be dry to the touch before applying. Allow the primer to dry for a minimum of 3 hours and a maximum of 48 hours. The primer dilution or modification will depend on the nature of the substrate. Substrate primer dilution with water as follows:
  • Concrete Dilute Primer 1:2 350 sq. ft.
  • Porous, absorbent surfaces (self-leveling, porous concrete) apply the primer in 2 coats. dilute the first coat 1:3 and the second coat 1:1 allow the primer to dry between coats 300 sq. ft. 1st ct 400 sq. ft. 2nd ct
  • Terrazzo, ceramic tile, burnished concrete dilute primer 1:1, and add 2-4 lbs of the dpu powder to create a slurry coat to scrub into the surface 300 sq. ft.
  • Wood dilute primer 1:5 400 sq. ft.
  • VCT / non-cushioned sheet vinyl dilute primer 1:1 and add 2-4 lbs. of dpu powder to create a slurry coat to scrub into the surface 300 sq. ft.
Coverages, Packaging:
50 lb bag
  • 1/4" pour depth, 24 sq ft
  • 1/2" pour depth,12 sq ft
  • 1" pour depth, 6 sq ft
  • 1 1/2"pour depth, 4 sq ft
.
** Read this information about Product Colors ** Warning The photos shown on this site are representative of the product colors. Actual colors may vary from the images shown for the following reasons:
  • The dye shades may vary from one production run to the next.
  • The color of the product will appear different in various lighting conditions (e.g. sunlight vs. fluorescent light).
  • Your individual monitor settings can cause the appearance of the color on the screen to differ from the actual photograph.
MANUFACTURER SITE | MSDS | DATA SHEET | WARRANTY | OTHER INFORMATION
ReviewsAsk a Question Quantity:  ea 


0 items
Store Feedback
"Nice site, good selection of tools for the trade."
Guest - FT LAUDERDALE
04/20/2015


"Very good and fast service from Mark. Thanks!!!"
Cindy Rash - SCREEN TECH INTL
07/19/2016


Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Manufacturers
Subscribe to the Newsletter
Email:
0 items
Manufacturer Info
Proflex
Other products
Share Product
Share via E-Mail
Share on Facebook Share on Twitter
Electronic Payments
Home  |  Reviews  |  Search  |  Technical Resources  |  Shipping  |  Privacy  |  About Us  |  Conditions of use  |  Contact  |  Locations  |  Links  |  Site Map
Copyright © 2013-2018 ShorelineFlooringSupplies.net
Your IP Address is : 54.226.55.151